Designed for small spaces – and large ones
Epic 4 is the latest creation to be released from our Labs! This miniscule monster immerses small spaces in rich, detailed, and transparent sound. Its passive radiator provides a deep low-end, while the Epic 4's mids and highs rival the sound reproduction capability of many larger speakers.
Epic 4's compact size is also perfect for multi-channel audio setups, such as 5.1, 7.1, or Dolby Atmos systems, where many smaller speakers are required. Epic 4 can be used on desktops, stands, or with wall mounts.
Epic 4 is the latest creation to be released from our Labs! This miniscule monster immerses small spaces in rich, detailed, and transparent sound. Its passive radiator provides a deep low-end, while the Epic 4's mids and highs rival the sound reproduction capability of many larger speakers.
Epic 4's compact size is also perfect for multi-channel audio setups, such as 5.1, 7.1, or Dolby Atmos systems, where many smaller speakers are required. Epic 4 can be used on desktops, stands, or with wall mounts.
Travels Well
Epic 4 loves to travel! It even includes its own padded travel case! Turn your next AirBnB into a studio.
|
Pure AnalogTaking a cue from it's larger siblings, Epic 4 features pure analog signal routing with high-quality, custom-designed components.
|
Dial in Your Studio
Epic 4 features high and low frequency trim controls to tune the speaker specifically to your studio space.
|
"If I found myself working away from home and needed some accomplished yet diminutive monitors that happened to come in their own padded shoulder bag, a pair of Epic 4s would exactly fit the bill."
– Phil Ward Sound On Sound Magazine, December 2022 |
Technical Specifications & Measurements
Frequency Response: |
80 Hz – 30 kHz ± 3dB |
Frequency Response: |
65 Hz – 40 kHz ± 10dB |
Amplifier Power: |
Woofer 50W RMS, Tweeter 50W RMS |
Amplifier Technology: |
Class D, 115 dB dynamic range, high current and damping, range over 100 kHz, ultra-low no-noise |
Maximum sound pressure per pair in full space in 1m of 100Hz: |
106 dB(C) SPL |
Power Supply: |
Universal 100-240VAC, 50/60Hz |
Woofer: |
4" - own design for high transient & low resonance |
Tweeter: |
1"- own design for high transient & wide response |
Crossover: |
3kHz, 24dB/Octave |
Input Impedance balanced (XLR): |
12kOhm |
Input Impedance unbalanced (RCA): |
3.3kOhm |
Input Sensitivity symmetrical: |
+4 dBu |
Input Sensitivity unbalanced: |
-10 dBV |
Room Correction High: |
± 5 dB in 1 dB Steps above 2.5kHz |
Room Correction Low: |
± 5 dB in 1 dB Steps below 250Hz |
Dimensions without Spikes: |
210 x 160 x 175 mm |
Dimensions with Spikes: |
240 x 160 x 175 mm |
Weight per Unit: |
2.95 kgs |